Tools
5 Pack, 4" 6 Tooth Wood Cutting Jig Saw Blade, For Wood, Fast, Rough Cut To 2-3/8", For Straight, Parallel Cuts, Very Fast, Clean Cuts In Hard & Soft Wood, Particleboard 1/4" - 2 3/8", Also Suitable For Plunge & Curve Cutting, Fits Bosch Models 1581AVS, 1581AVSK, 1584AVS, 1584AVSK, 1587AVS, 1587AVSK, 1587AVSP, As Well As Other Older Bosch Models.
36" Concrete Broom, Long Wearing 3" Black Propylene Bristles Set Solidly Into Natural Lacquered Hardwood Block, Threaded Hole Accepts Any Standard Broom Handle, Ideal For Applying Non-Slip Finish To Newly Finished Concrete Surfaces.
4 OZ, .125 Diamter Spool Non-Electrical Solder, Leaded Acid Flux Core, 40% Tin, 60% Lead, .125 Diameter Spool.
3 OZ, .125 Diameter Spool Plumbing Solder, Lead Free, Solid Wire Silver Bearing.
3 OZ, .125 Diameter Spool Plumbing Solder, Lead Free, 95% Tin, 5% Antimony, Solid Wire, Carded.
1.25 OZ, Tube Plumbing Solder, Lead Free Solder Paste Silver Bearing, 1.25 Oz. Carded.
3/4" x 12", Percussion Drill Bit, Flute Design Efficiently Removes Dust Reducing Bit Binding, Optimum Grade Of Carbide Maximizes Durability, Carbide Tip Provides Up To 2 Times Longer Life, Tip Configuration Reduces Walking For Improved Accuracy, Drills Up To 2 Times More Holes Than Conventional Percussion Bits, Drills 50% More Holes Per Charge With Cordless Hammerdrills.
7/16" x 6", Percussion Drill Bit, Flute Design Efficiently Removes Dust Reducing Bit Binding, Optimum Grade Of Carbide Maximizes Durability, Carbide Tip Provides Up To 2 Times Longer Life, Tip Configuration Reduces Walking For Improved Accuracy, Drills Up To 2 Times More Holes Than Conventional Percussion Bits, Drills 50% More Holes Per Charge With Cordless Hammerdrills.
Master Plumber, PT, Thread Cutting Oil, Specially Formulated To Give Sharp, Clean Threads & To Extend Die Life.
4-1/2" x 11", Metal Finishing Pad, Tough, Non-Woven Synthetic Material That Will Not Rust, Splinter Or Shred, For Removing Light Rust & Brightening Metal, Ideal For Use With Solvents & Cleaners.
4-3/8" x 11", Wood Finishing Pad, Ideal For Smoothing Bare Wood, Rubbing In Furniture Oils & Denibbing Between Coats Of Varnish, Stain Or Sealer, Made From A Tough, Non-Woven, Synthetic Material That Won't Rust, Splinter Or Shred Like Steel Wool, Lasts A Long Time & Rinses Clean For Repeated Use.
#1 Unibit, 1/8" To 1/2" Step Drill, 13 Hole Sizes From 1/8" To 1/2" In 1/32" Increments, Maximum Material Thickness 1/8", 3 Flatted Shank, Shank Size 1/4", Single Fluted Cutting Edge Assures True Round Holes & Allows Greater Control, Carded.
#3 Unibit, 1/4" To 3/4" Step Drill, 9 Hole Sizes From 1/4" To 3/4" In 1/16" Increments, Maximum Material Thickness 1/8", 3 Flatted Shank, Shank Size 3/8", Single Fluted Cutting Edge Assures True Round Holes & Allows Greater Control, Carded.